Schrittmotoren

A stepper motor is a brushless motor designed for precise, repeatable positioning by converting digital pulse signals into discrete mechanical steps. Inside, a toothed rotor interacts with a multi-phase stator, and as the controller energizes each winding in sequence, it creates a rotating magnetic field that advances the rotor in fixed increments, typically 1.8° or 0.9° per step. This electronic commutation enables accurate motion without feedback, so most stepper systems operate in open loop. Stepper are divided into two classes with different drive requirements, unipolar for simpler control and bipolar configurations for higher torque, while stepping modes such as full step, half step, and microstepping allow designers to balance torque, smoothness, and resolution. Microstepping improves motion smoothness and reduces vibration, though it does not always translate to perfectly linear increases in positional accuracy.

Compared to servo and DC motors, steppers offer a middle ground between performance and simplicity. They are cost-effective and easy to implement, making them ideal for low-to-moderate speed applications that require precise positioning, such as CNC machines, 3D printers, and automation systems. However, their torque drops off at higher speeds due to inductance and current limitations, and they cannot inherently correct for missed steps like closed-loop servo systems. Servos provide better high-speed performance, efficiency, and dynamic response but at higher cost and complexity, while DC motors are best suited for simple continuous rotation with minimal positioning control. In practice, stepper motors are the right choice when applications prioritize accuracy, holding torque, and system simplicity over speed and adaptive control.