Microchip Technology

MCP1630 Boost Mode LED Driver Demo Board

Microchip's step-up, switch-mode DC/DC converter for power LED applications

MCP1630 Boost Mode LED Driver Demo BoardMicrochip's MCP1630 boost mode LED driver demo board is a step-up, switch-mode DC/DC converter used for power LED applications. The demo board provides a 350 mA or 700 mA constant current source with a jumper selection. The input operating voltage range is 9 VDC to 16 VDC, and the board can supply up to 30 W to a string of power LEDs. The MCP1630 is designed for use with an MCU that provides a reference clock source. The MCU controls the PWM frequency and maximum duty cycle. The switching frequency can be up to 1 MHz, depending on the application requirements. The MCU can also control the reference input for the error amplifier when dimming or soft start functions are required. Multiple MCP1630 devices can be attached to an MCU to support multiple power channels.

Features Applications
  • PCB with 5 LEDs provided for evaluation
  • Compact size with high output power
  • High efficiency over entire operating input voltage range
  • Selectable 350 mA or 700 mA output current
  • Up to 30 W output power
  • Optional software dimming control
  • 500 kHz switching frequency can be changed in firmware
  • Additional application functions can be provided in firmware
  • Intelligent power systems
  • Smart battery charger applications
  • Multiple output / multiple phase converters
  • Output voltage calibration
  • AC power factor correction
  • VID capability (programmed and calibrated by PIC® MCU)
  • Buck / boost / buck-boost / SEPIC / flyback / isolated converters
  • Parallel power supplies

Demo Board

AbbildungHersteller-TeilenummerBeschreibungVerfügbare MengePreisDetails anzeigen
EVAL BOARD FOR MCP1630MCP1630DM-LED2EVAL BOARD FOR MCP16304 - Sofort$63.27Details anzeigen

Related Demo Boards Battery Chargers

AbbildungHersteller-TeilenummerBeschreibungVerfügbare MengePreisDetails anzeigen
EVAL BOARD FOR MCP1630MCP1630RD-NMC1EVAL BOARD FOR MCP16300 - Sofort$47.73Details anzeigen
EVAL BOARD FOR MCP1630MCP1630RD-DDBK3EVAL BOARD FOR MCP16300 - Sofort$60.24Details anzeigen

Related Demo Boards Converters

AbbildungHersteller-TeilenummerBeschreibungVerfügbare MengePreisDetails anzeigen
EVAL BOARD FOR MCP1630MCP1630DM-DDBS1EVAL BOARD FOR MCP16300 - SofortSee Page for PricingDetails anzeigen

Related ICs

AbbildungHersteller-TeilenummerBeschreibungVerfügbare MengePreisDetails anzeigen
IC REG CTRLR MULT TOPOLOGY 8MSOPMCP1630VT-E/MSIC REG CTRLR MULT TOPOLOGY 8MSOP500 - Sofort$1.35Details anzeigen
IC REG CTRLR MULT TOPOLOGY 8MSOPMCP1630-E/MSIC REG CTRLR MULT TOPOLOGY 8MSOP636 - Sofort$1.35Details anzeigen
IC REG CTRLR MULT TOPOLOGY 8MSOPMCP1630V-E/MSIC REG CTRLR MULT TOPOLOGY 8MSOP302 - Sofort$1.35Details anzeigen
Veröffentlicht: 2010-10-20

Related Product Highlight

Analog Products Microchip offers a large portfolio of cost-effective analog products including power management, signal chain, and interface solutions for a variety of applications. Find a solution that best fits your needs today!
Strommessverstärker MCP6C02 Der MCP6C02 von Microchip ist ein einzelner High-Side-Strommessverstärker, der es einem Design ermöglicht, Shunt-Widerstände mit niedrigerem Wert und geringerer Verlustleistung zu verwenden.

Related Articles and Blogs

Vehicle-to-Grid Gains Traction as Elastic Energy Reservoir Vehicle-to-grid (V2G) power acts as an energy store to be used as a primary source of energy for electric vehicles and plug-in hybrids.
Buck-Boost DCDC Handles Wide Input-Voltage Range A buck-boost DC/DC converter delivers a regulated output voltage even when the input voltage is below or above that required by the load.
Single-Stage PFC LED Drivers Simplify T8 Lamp Replacements Determining T8 LED tube replacements based on isolated or non-isolated design, output voltage requirements, power level & dimming.