Datenblatt für PCMFxHDMI2BA-C

Table 1. Product overview nexpefla
PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with
integrated bidirectional ESD protection
Rev. 3 — 20 May 2020 Product data sheet
1. General description
Common-mode ElectroMagnetic Interference (EMI) filters with integrated bidirectional ElectroStatic
Discharge (ESD) protection for one, two and three differential channels. The devices are designed
to provide low insertion loss for differential high-speed signals on each channel while unwanted
common-mode signals are attenuated.
Each differential channel incorporates two signal lines that are coupled by integrated coils. Diodes
provide protection to downstream components from ESD voltages up to ±15 kV on each signal line.
Table 1. Product overview
Type number Number of channels Package Name
PCMF1HDMI2BA-C 1 WLCSP5
PCMF2HDMI2BA-C 2 WLCSP10
PCMF3HDMI2BA-C 3 WLCSP15
2. Features and benefits
•One, two and three differential channels common-mode EMI filters with integrated ESD
protection
•ESD protection up to ±15 kV contact discharge according to IEC 61000-4-2
•Superior common-mode suppression over a wide frequency range
•Superior RF performance compared to other integrated filters or discrete filters with external
ESD protection
•Extremely high symmetry between line pairs
•Industry-standard Wafer-Level Chip-Scale Packages: WLCSP5, 10 and 15 for smaller footprint
3. Applications
•Smartphone, cellular and cordless phone
•HDMI2.1, HDMI2.0, HDMI1.4
•General-purpose downstream ESD protection for differential data lines
•Tablet PC and Mobile Internet Device (MID)
•MIPI M-PHY and D-PHY as used in Camera Serial Interface (CSI) and Display Serial Interface
(DSI)
PCMFxHDMI2BA-C series Table 2. Pinning O 0 A1 = C1 0 O Q 2: 2: sz sz Transparenuop View .5 O O ANS = (31,3 0 .. O O 2: 2: O O SZ SZ O ? O 0 WW Transparent top new A1.3,5 —u“n—ci.3,5 O Nl/J ass-029494 0 000000 000000 0 Transparent top new
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
4. Pinning information
Table 2. Pinning
Pin Symbol Description Simplified outline Graphic symbol
PCMF1HDMI2BA-C (WLCSP5_2-1-2)
A1 CH1_IN+ channel 1+, external
A2 CH1_IN- channel 1-, external
B1 GND_CH1 ground channel 1
C1 CH1_OUT+ channel 1+, internal
C2 CH1_OUT- channel 1-, internal
A B C
B1
1
2
Transparent top view
WLCSP5_2-1-2
A1
A2
C1
C2
aaa-028492
B1
PCMF2HDMI2BA-C (WLCSP10_4-2-4)
A1 CH1_IN+ channel 1+, external
A2 CH1_IN- channel 1-, external
A3 CH2_IN+ channel 2+, external
A4 CH2_IN- channel 2-, external
B1 GND_CH1 ground channel 1
B2 GND_CH2 ground channel 2
C1 CH1_OUT+ channel 1+, internal
C2 CH1_OUT- channel 1-, internal
C3 CH2_OUT+ channel 2+, internal
C4 CH2_OUT- channel 2-, internal
A B C
B1
B2
1
2
3
4
Transparent top view
WLCSP10_4-2-4
aaa-028493
A1, 3
A2, 4
C1, 3
C2, 4
B1, B2 - no internal connection
PCMF3HDMI2BA-C (WLCSP15_6-3-6)
A1 CH1_IN+ channel 1+, external
A2 CH1_IN- channel 1-, external
A3 CH2_IN+ channel 2+, external
A4 CH2_IN- channel 2-, external
A5 CH3_IN+ channel 3+, external
A6 CH3_IN- channel 3-, external
B1 GND_CH1 ground channel 1
B2 GND_CH2 ground channel 2
B3 GND_CH3 ground channel 3
C1 CH1_OUT+ channel 1+, internal
C2 CH1_OUT- channel 1-, internal
C3 CH2_OUT+ channel 2+, internal
C4 CH2_OUT- channel 2-, internal
C5 CH3_OUT+ channel 3+, internal
C6 CH3_OUT- channel 3-, internal
B2
B3
B1
1
2
3
4
5
6
A B C
Transparent top view
WLCSP15_6-3-6
aaa-028494
B1, B2, B3 - no internal connection
A1, 3, 5
A2, 4, 6
C1, 3, 5
C2, 4, 6
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 2 / 17
PCMFxHDMI2BA-C series Table 3. Ordering information Table 4. Marking codes
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
5. Ordering information
Table 3. Ordering information
PackageType number
Name Description
PCMF1HDMI2BA-C WLCSP5 wafer level chip-size package; 5 bumps (2-1-2)
PCMF2HDMI2BA-C WLCSP10 wafer level chip-size package; 10 bumps (4-2-4)
PCMF3HDMI2BA-C WLCSP15 wafer level chip-size package; 15 bumps (6-3-6)
6. Marking
Table 4. Marking codes
Type number Marking code
PCMF1HDMI2BA-C PF1A
PCMF2HDMI2BA-C PF2A
PCMF3HDMI2BA-C PF3A
7. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VIinput voltage -4 4 V
IEC 61000-4-2, level 4;all
input pins to ground
•contact discharge -15 15 kV
•air discharge -15 15 kV
IEC 61000-4-2, level 4;all
output pins to ground
•contact discharge -2 2 kV
VESD electrostatic discharge
voltage
•air discharge -2 2 kV
IPPM rated peak-pulse
current
tp = 8/20 μs -7.5 7.5 A
Tstg storage temperature -40 +125 °C
Tamb ambient temperature -40 +125 °C
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 3 / 17
PCMFxHDMI2BA-C series
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
8. Characteristics
8.1. Channel characteristics
Table 6. Channel characteristics
Tamb = 25 °C unless otherwise specified.
Symbol parameter Conditions Min Typ Max Unit
RS(ch) channel
series
resistance
single line; input
to output
- 2.2 - Ω
Cddiode
capacitance
f = 1 MHz;
VI = 2.5 V
[1] - 0.3 - pF
IRM reverse
leakage
current
per line;
VI = 4 V
- 1 100 nA
VBR breakdown
voltage
IR = 1 mA 6 9 - V
TLP; positive
transient
[2] - 0.29 - ΩRdyn dynamic
resistance
TLP; negative
transient
[2] - 0.29 - Ω
[1] This parameter is guaranteed by design
[2] 100 ns Transmission Line Pulse (TLP); 50 Ω; pulser at 70 ns to 90 ns.
8.2. Frequency characteristics
Table 7. Frequency characteristics
Tamb = 25 °C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Differential mode: Sdd21
f-3dB cut-off frequency [1] - 10 - GHz
[1] Normalized to attenuation at 1 MHz.
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 4 / 17
PCMFxHDMI2BA-C series 3357029770 3357029771 3357029773 3357029772
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
aaa-029770
-4
-2
0
Sdd21
(dB)
-6
f (Hz)
1071011
1010
108109
Fig. 1. Differential mode insertion loss; typical values
aaa-029771
-20
-30
-10
0
Scc21
(dB)
-40
f (Hz)
1071011
1010
108109
Fig. 2. Common-mode insertion loss; typical values
aaa-029772
-40
-60
-20
0
Sdd21
(dB)
-80
f (Hz)
1081011
1010
109
CH1 to CH2
Fig. 3. Differential crosstalk; typical values
t (ns)
44.2 44.844.644.4
aaa-029773
95
105
115
Zdif
(Ω)
85
Z reference
Z DUT
tr = 200 ps
Fig. 4. Differential Time Domain Reflectometer (TDR)
plot; typical values
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 5 / 17
PCMFxHDMI2BA-C series ml mu»: m» 1 “240 mu 1 “films ass-1731492 «57031493
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Short cable model (SCM), no equalizer
Fig. 5. HDMI 2.1 12G FRL eye diagram, PCB with device; typical values
Short cable model (SCM), no equalizer
Fig. 6. HDMI 2.1 12G FRL eye diagram, PCB without device; typical values
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 6 / 17
PCMFxHDMI2BA-C series Real mu [ya 1 com MU! 1 mm, ass-1731494 ass-1731495
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Worst cable model, 8dB
Fig. 7. HDMI 2.1 12G FRL eye diagram, PCB with device; typical values
Worst cable model, 8dB
Fig. 8. HDMI 2.1 12G FRL eye diagram, PCB without device; typical values
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 7 / 17
PCMFxHDMIZBA-C series
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Worst cable model, no equalizer
Fig. 9. HDMI 2.1 6 Gbps TMDS eye diagram, PCB with device; typical values
Worst cable model, no equalizer
Fig. 10. HDMI 2.1 6 Gbps TMDS eye diagram, PCB without device; typical values
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 8 / 17
PCMFxHDMI2BA-C series
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
VCL (V)
0 16124 8
aaa-029774
10
15
5
20
25
I
(A)
0
Transmission Line Pulse (TLP) = 100 ns;
measured CH_IN to GND
Fig. 11. Dynamic resistance with positive clamping;
typical values
VCL (V)
-16 0-4-12 -8
aaa-029775
-15
-10
-20
-5
0
I
(A)
-25
Transmission Line Pulse (TLP) = 100 ns;
measured CH_IN to GND
Fig. 12. Dynamic resistance with negative clamping;
typical values
VCL (V)
0 302010
aaa-029776
20
40
60
I
(A)
0
Very-Fast Transmission Line Pulse
(VF-TLP) = 5 ns;
measured CH_IN to GND
Fig. 13. Dynamic resistance with positive clamping;
typical values
VCL (V)
-30 0-10-20
aaa-029777
-40
-20
0
I
(A)
-60
Very-Fast Transmission Line Pulse
(VF-TLP) = 5 ns;
measured CH_IN to GND
Fig. 14. Dynamic resistance with negative clamping;
typical values
The device uses an advanced clamping structure showing a negative dynamic resistance.
This snap-back behavior strongly reduces the clamping voltage to the system behind the ESD
protection during an ESD event. Do not connect unlimited DC current sources to the data lines to
avoid keeping the ESD protection device in snap-back state after exceeding breakdown voltage
(due to an ESD pulse for instance).
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 9 / 17
PCMFxHDMI2BA-C series ass-029778 ass-029779 CL CL
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
VCL (V)
0 862 4
aaa-029778
4
2
6
8
I
(A)
0
IEC61000-4-5; tp = 8/20 μs; positive pulse
Fig. 15. Dynamic resistance with positive clamping;
typical values
VCL (V)
-8 0-2-6 -4
aaa-029779
-4
-6
-2
0
I
(A)
-8
IEC61000-4-5; tp = 8/20 μs; negative pulse
Fig. 16. Dynamic resistance with negative clamping;
typical values
9. Application information
The device is designed to provide high-level ESD protection for differential high-speed data line
pairs such as HDMI2.1, HDMI2.0 and HDMI1.4.
When designing the Printed-Circuit Board (PCB), give careful consideration to impedance matching
and signal coupling. Do not connect the protected signal lines to unlimited current sources like, for
example, a battery.
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 10 / 17
PCMFxHDMI2BA-C series WLCSPS: wafer level chip-size package; 5 bumps (2—1—2) PCMF1HDMIZBA/C i fill fa \ a? Lg D UM) U Ef©
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
10. Package outline
Fig. 17. Package outline WLCSP5
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 11 / 17
PCMFxHDMI2BA-C series WLCSP1U: wafer level chip-site package: 10 bumps (4.2.4) PCMFZHDMIZBA/C fi I J; , ,,,,, + ,,,,, , r L ‘ TD? \’ ’\ ©©p©fi **€}+€Lw‘ D 0 OK) Q WET LE E©
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Fig. 18. Package outline WLCSP10
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 12 / 17
PCMFxHDMI2BA-C series WLCSP15: wafer level chip-site package: 15 bumps (6-3-6) PCMFSHDMIZBNC q” % , ,,,,,,,,,, } ,,,,,,,,, 1 TD TF‘: ”H‘ ©®Ox©OGfiI D 77777 @@%@*43 ’T3 000000 1 Lg; L43 E©
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Fig. 19. Package outline WLCSP15
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 13 / 17
PCMFxHDMI2BA-C series WLCSPS: Solder footprint and stencil aperture PCMF1HDMIZBNC 1%00 WLCSP10: Soldwr loolprint and stencil aperture PCMFZHDMIZBNC % Q
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
11. Soldering
WLCSP5: Solder footprint and stencil aperture PCMF1HDMI2BA/C
pcmf1hdmi2ba-c_fr
solder resist opening (SR)
occupied area
solder land plus solder paste
solder paste deposit (SP)
solder land (SL)
Dimensions in mm
SRP
0.25 0.325
Hx
1.00
SL
0.25
SP
0.40
Hy
1.40
SL = SP
SR
detail X
see
detail X
P
P
Hx
Hy
recommend stencil thickness: 0.1 mm
20-05-06
Fig. 20. Soldering footprint WLCSP5 (PCMF1HDMI2BA/C)
WLCSP10: Solder footprint and stencil aperture PCMF2HDMI2BA/C
pcmf2hdmi2ba-c_fr
solder resist opening (SR)
occupied area
solder land plus solder paste
solder paste deposit (SP)
solder land (SL)
Dimensions in mm
P1 SRP
0.80 0.25 0.325
Hx
1.80
SL
0.25
SP
0.40 20-05-06
Hy
1.40
SL = SP
SR
detail X
see
detail X
P
P
P1
Hx
Hy
recommend stencil thickness: 0.1 mm
Fig. 21. Soldering footprint WLCSP10 (PCMF2HDMI2BA/C)
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 14 / 17
PCMFxHDMI2BA-C series WLCSP15: Soldwr loolprin! and stencil aperture PCMFSHDMIZBA/C ii%%§
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
WLCSP15: Solder footprint and stencil aperture PCMF3HDMI2BA/C
pcmf3hdmi2ba-c_fr
solder resist opening (SR)
occupied area
solder land plus solder paste
solder paste deposit (SP)
solder land (SL)
Dimensions in mm
P1 SRP
0.80 0.25 0.325
Hx
2.60
SL
0.25
SP
0.40 20-05-06
recommend stencil thickness: 0.1 mm
Hy
1.40
SL = SP
SR
detail X
see
detail X
P
P
P1
Hx
Hy
Fig. 22. Soldering footprint WLCSP15 (PCMF3HDMI2BA/C)
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 15 / 17
PCMFxHDMI2BA-C series Table 8. Revision history
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
12. Revision history
Table 8. Revision history
Document ID Release
date
Data sheet status Change
notice
Supersedes
PCMFXHDMI2BA_C_SER v.1 20200520 Product data sheet - -
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 16 / 17
PCMFxHDMI2BA-C series
Nexperia PCMFxHDMI2BA-C series
Common-mode EMI filter for differential channels with integrated bidirectional ESD protection
Contents
1. General description......................................................1
2. Features and benefits.................................................. 1
3. Applications.................................................................. 1
4. Pinning information......................................................2
5. Ordering information....................................................3
6. Marking.......................................................................... 3
7. Limiting values............................................................. 3
8. Characteristics.............................................................. 4
8.1. Channel characteristics............................................... 4
8.2. Frequency characteristics............................................4
9. Application information............................................. 10
10. Package outline........................................................ 11
11. Soldering................................................................... 14
12. Revision history........................................................16
© Nexperia B.V. 2020. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 20 May 2020
PCMFXHDMI2BA_C_SER All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved
Product data sheet Rev. 3 — 20 May 2020 17 / 17