Datenblatt für 6534 Series von Bourns Inc.

Power Ranng IVolIage Limired av Power DIssioaIion or 350 VACI wnlcnever Is Less) +70 °c +125 ”0 , , lnsulaIIon neslsrance (500 me), 1000 megonms mInImum Resalullon" Environmenlal Cllavat’:1firistil:s1 OperaIIng TemperaIure Rang SIorage Temperarure Range TemperaIure CoelIIcIenI Over SIorage Temperarure Range woraIIon , wIper Bounce , Toral ResisIance SnIlI Shock , wIper Bounce , noIaIIonal Llle INo Load) Toral ResisIance SnilI MoIsIure Resistance IMIL Toral ResisIance SM -40 °c Io +125 "c -55 °c Io +125 "c 1500 ppm/”C maximum g % maximum 50 G ,l millisecond maximum 25I 000I 000 shall revoluIions .flD % maximum .flD % maximum IP naIing ,,IP 40 Mechanical Characlerislics' Mecnanical Angle, Conllnuous Torque ISIaning 0 )maximum snalr nunouI , , 0. 025 mm (0, 001 in, l TI, 0, LaIeraI 0mm 05 mm (0, 002 ,m n, Snalr End Play , Snalr Radial Play , Pllal DIameIer nunouI. Backlash Welghlu Terminals Soldering CondIIIon Manual Soldering 00 mm (0,003 In,l TLR, 00mmI00,,0aInl'lln .025 mm (0,001 In,l_'l.l, n, 0.1 ” maximum ,18 grams I e ein turrer slyle ,ss 5Sn/3,0Ag/0.5Cu solid me or no-clean rosIn cored wire 370 ”c (700 ”Fl max lor 3 seconds .. 06.5Sn/3,0Ag/0.5Cu Salderwllh no-clean llux 260 ”c (500 ”Fl max lor 5 seconds Nor recommended anu aclurers name an pan num er, resIsIance value and Iolerance, linearity (olevanoeI winng diagram and daIe code, . . I0 cups maximum Wave Soldering Wasn processes Marking .. , Sanging. ‘A( room amcienI: +25 ”0 nomInal and 50 % relaIIve numidin nominal, exceoI as noIed. Recommended Par! Numbers Pen Number ""13"“ 0534371402 l ,000 05343717202 2,000 05343717502 5,000 0534371403 10000 0534371203 20000 0534371503 50000 0534371404 100000 500 ‘RuHS Dlrcclive 2002/95/32 Jan 27 2003 Including annex and RuHS RecasI 2m socclllcaIIons are suolecI lo ousIomers snauld venly acIIIal devlcc penarmance III Inc
Features
■ Servo mount
■ Shaft support by front and rear precision ball bearings
■ Non-standard features and specifi cations available
■ Gangable up to 10 cups
6534 - 7/8 ” (22 mm) Precision Potentiometer
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications
REV. 08/12
*RoHS COMPLIANT
Electrical Characteristics1
Standard Resistance Range....................................................................................1 K to 100 K ohms
Total Resistance Tolerance ......................................................................................................... ±10 %
Independent Linearity ................................................................................................................ ±0.5 %
Effective Electrical Angle .......................................................................................................320 ° ±3 °
End Voltage .................................................... 0.1 % maximum (0.25 at 2 K ohms, 0.4 % at 1 K ohm)
Output Smoothness ..................................................................................................................... 0.1 %
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level .............................................................................................................750 VAC minimum
Power Rating (Voltage Limited By Power Dissipation or 350 VAC, Whichever is Less)
+70 °C ......................................................................................................................................1 watt
+125 °C ....................................................................................................................................0 watt
Insulation Resistance (500 VDC) ................................................................1,000 megohms minimum
Resolution ................................................................................................................Essentially infi nite
Environmental Characteristics1
Operating Temperature Range .................................................................................-40 °C to +125 °C
Storage Temperature Range .................................................................................... -65 °C to +125 °C
Temperature Coeffi cient Over Storage Temperature Range ...........................±500 ppm/°C maximum
Vibration ........................................................................................................................................15 G
Wiper Bounce ........................................................................................... 0.1 millisecond maximum
Total Resistance Shift ...............................................................................................±2 % maximum
Shock.............................................................................................................................................50 G
Wiper Bounce ........................................................................................... 0.1 millisecond maximum
Rotational Life (No Load)......................................................................... 25,000,000 shaft revolutions
Total Resistance Shift .............................................................................................±10 % maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift .............................................................................................±10 % maximum
IP Rating ....................................................................................................................................... IP 40
Mechanical Characteristics1
Mechanical Angle ............................................................................................................... Continuous
Torque (Starting & Running) ...........................................................0.18 N-cm (0.25 oz.-in.) maximum
Shaft Runout...............................................................................................0.025 mm (0.001 in.) T.I.R.
Lateral Runout ..............................................................................................0.05 mm (0.002 in.) T.I.R.
Shaft End Play ..............................................................................................0.08 mm (0.003 in.) T.I.R.
Shaft Radial Play ..........................................................................................0.08 mm (0.003 in.) T.I.R.
Pilot Diameter Runout ................................................................................0.025 mm (0.001 in.) T.I.R.
Backlash ....................................................................................................................... 0.1 ° maximum
Weight ................................................................................................................................... 18 grams
Terminals ...............................................................................................................Side exit turret style
Soldering Condition
Manual Soldering .................................96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire
370 °C (700 °F) max. for 3 seconds
Wave Soldering ........................................................ 96.5Sn/3.0Ag/0.5Cu solder with no-clean fl ux
260 °C (500 °F) max. for 5 seconds
Wash processes ..................................................................................................Not recommended
Marking .................................Manufacturer’s name and part number, resistance value and tolerance,
linearity tolerance, wiring diagram, and date code.
Ganging ................................................................................................................... 10 cups maximum
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Product Dimensions
Recommended Part Numbers
Part Number Resistance
(Ω)
6534S-1-102 1,000
6534S-1-202 2,000
6534S-1-502 5,000
6534S-1-103 10,000
6534S-1-203 20,000
6534S-1-503 50,000
6534S-1-104 100,000
MIN.
5.08
(.200)
5.08
(.200)
DIA.
X 45 ° ± 10 °
3.170 + .000/- .008
(.1248+.0000/-.0003)
CHAMFER
.25
(.010)
19.050 +.000/ - .013
(.75+.0000/-.0005)
DIA.
22.23
(.875)
1.57
(.062)
1.57
(.062)
MIN.
1.45
(.057)
12.07
(.475)
15.24
(.600)
12.70 ± .79
(1/2 ± 1/32)
ADD FOR EACH ADDITIONAL CUP.
1
2
3
120 ° MAX.
30 °
± 3 °
30 °
± 3 °
MAX.
TOLERANCES: EXCEPT WHERE NOTED
.51 .13
DECIMALS: .XX ± (.02), .XXX ± (.005)
FRACTIONS: ±1/64
MM
DIMENSIONS: (IN.)
1
CCW
2WIPER
3CW
CLOCKWISE