Datenblatt für CC12M Series Spec von Eaton - Electronics Division

EPSrCClZM CClZM Engineering Product Specmonuon Created By: M_ Jomer Engineering Approval V. Ktllrtl Sept 1.2006 Sheet 1 of 9 COOPER Bussmann This is un nnlnronsheu work. Further urssernnnuon or urseiosnre to the public rs I‘ROHlBl'l'ELt. 'rins nnlnronsheu work is protected by Federal Copyright luw uml ull rrgins urerennuer tire reserreu by Cooper irnlnstrres, ine. 'l'he inlormulion eontnnreu in uns document is the property at Cooper irnlnstrres, ine. It is not for public urseiosnre. I’o “ ‘e at the ion at the inlormulion does not convey our right to loun, sell or u ~e1o-e the inlormulion. Urnnurorneu reprouneuon or tnlormutton rs proinlnteu. This document is to be returneu to Cooper irnlnstrres, ine. upon eornpieuon oi the purposes for which n is loaned or upon request. Rev. Re prion Date ECN Author Appr. D Added CCI 2M ItlA CCIZM | ZA KIN/(l7 “07026 Jlun Gong SD C Added the tolerance «it dtlnctmon nemS 2 6/7/07 “07028 Jlun Gong SD 1. W lmuul Rclcuwe lZ/‘J/(lS n/a Section Title 1.0 Scope 2.0 General Information 3.0 Manufacturer and Production Facility 4.0 Part Numbering System 5.0 Mechanical Requirements 6.0 Electrical Specifications 7.0 Agency Requirements 8.0 Marking Specification 9.0 Soldering Recommendations 10.0 Packaging Specification 11.0 Temperature DeeRatlng 12.0 Process Flow Chart 13.0 Environmental Requirements 14.0 End
Document No.:
EPS-CC12M
Title:
CC12M Engineering Product Specification
Created By:
M. Joiner
Engineering Approval
V. Kalra
Date:
Sept 1, 2006 Sheet 1 of 9
114 Old State Rd. Ellisville, MO 63021
COPYRIGHT
-
Cooper Industries, Inc.
CONFIDENTIAL
-
Rev. Revision Description Date
ECN Author
Appr.
D Added CC12M10A , CC12M12A 8/17/07
H07083 Jian.Gong
SD
C Added the tolerance of dimension, item5.2 6/7/07 H07028 Jian.Gong
SD
B
Added ‘ Lead-Free’ description, item 2.0 ; Changed the resistance and I
2
t, item 6.1 ;
Updated Agency Approvals, item 7.0
4/6/07 H07024 Jian.Gong
SD
A Added CC12M15A, changed voltage to 24V 9/01/06
SB06315 M. Joiner
V. Kalra
-- Initial Release 12/9/05
n/a
Form 202B-TGW01-IPS, Rev. 3/04
Engineering Product Specification
CC12M Series
VRM Overcurrent Protection
Table of Contents
Section Title
1.0 Scope
2.0 General Information
3.0 Manufacturer and Production Facility
4.0 Part Numbering System
5.0 Mechanical Requirements
6.0 Electrical Specifications
7.0 Agency Requirements
8.0 Marking Specification
9.0 Soldering Recommendations
10.0 Packaging Specification
11.0 Temperature De-Rating
12.0 Process Flow Chart
13.0 Environmental Requirements
14.0 End
EPSrCClZM CClZM M. Jomcr V Kalra Scpll.20l)() Shem 2 of 9
Document No.:
EPS-CC12M
Title:
CC12M
Created By:
M. Joiner
Eng./Appr.:
V. Kalra
Date:
Sept 1, 2006 Sheet 2 of 9
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
1.0 Scope
This Engineering Product Specification (EPS) is intended to provide end customers with
information regarding Bussmann’s CC12M VRM Overcurrent Protection Product Series
overcurrent protection devices.
2.0 General Information
The Bussmann CC12M VRM Overcurrent Protection Device is a RoHS compliant & Lead-Free,
one-time fuse based on Bussmann’s SolidMatrix technology. It is designed to provide superior
protection from short circuit overcurrent events common to high-current Voltage Regulator
Module (VRM) equipment. This device is designed to be compatible with wave and IR
soldering processes and allow end users to protect their VRM circuits.
3.0 Manufacturer and Production Facility
Manufacturer
Cooper Bussmann, Inc.
P.O. Box 14460
St. Louis, MO 63178-4460
Production Facilities
A) Cooper Electronic Shanghai, Ltd
955 Sheng Li Road
Pudong, Shanghai, China
B) Silver Victory (Donguan) Plant
Xin Min Industrial Estate
Changang Donguan
Guangdong Province, China
EPSrCClZM CClZM M. Jomcr Sept 1. 2006 V Kalra Shem 3 of 9 Q E M M C012M10A 10A C012M12A 12A C012M15A 15A cc12M20A 20A
Document No.:
EPS-CC12M
Title:
CC12M
Created By:
M. Joiner
Eng./Appr.:
V. Kalra
Date:
Sept 1, 2006 Sheet 3 of 9
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
4.0 Part Numbering System
4.1.1 Catalog Symbol
Example: CC12M20A
CC 12 M 20A
1 2 3 4
1) Technology CC (Ceramic CHIP™Fuse)
2) Footprint 12 (1206)
3) Family: M (VRM Protection Device)
4) Amp Rating: 20A
4.1.2 Available Amperage Ratings
Catalog Symbol Amperage Rating
CC12M10A 10A
CC12M12A 12A
CC12M15A 15A
CC12M20A 20A
Note: Amperage rating established in test conditions using 10 AWG wire.
Thermal management in end-use application must be taken into consideration.
EPSrCClZM CClZM M. Jomcr V Kalra Scpll.200() Shem 4 of 9 nd Termination % 059‘ 2045 0,035 7005 F
Document No.:
EPS-CC12M
Title:
CC12M
Created By:
M. Joiner
Eng./Appr.:
V. Kalra
Date:
Sept 1, 2006 Sheet 4 of 9
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
5.0 Mechanical Requirements
5.1 Construction (not to scale)
1. End Termination
a. Nickel Undercoat
b. Tin Overcoat
2. Ceramic Substrate (white)
3. Numeric Ampere Rating
4. Metal Film Fusible Element
5. Silver Termination Pad
6. Fused Glass Cover (green)
5.2 Nominal Dimensions
5.2.1 End View (mm/inches)
0.89 + .20, -.15
(0.035 + .008, -.006)
.20
(0.063 ? .008)
0.89
+
.20
-.15
0.035
+.008
-
.
006
1.60
0.20
0.063
.008
EPSVCCIZM CClZM M. Jomer Sept 1. 2006 V Kalra Sheet Sof‘) . t. 1g. . t. 1g. 0053203320 ' ‘7 + ‘7 0053203320 I.60i,20 0.063i.005 + 07:32:35 » 051:.25‘1g. 4» 17 + <7 051:.25‘1g.="" oozoimo="" oozoimo="" .9="" 0.394045="" 0.035="" ms="" +="" .="" i,="" “="" 0:32:35="" 4'="" catalog="" ampere="" voltage="" interrupting="" typical="" typical="" cc12m10a="" 10a="" 24vdc="" 150a="" 00045="" 20="" cc12m12a="" 12a="" 24de="" 150a="" 00039="" 70="" cc12m15a="" 15a="" 24vdc="" 150a="" 00031="" 25.5="" cc12m20a="" 20a="" 24vdc="" 150a="" 00018="" 48.6="" ed="" atde="" ed="" als="">
Document No.:
EPS-CC12M
Title:
CC12M
Created By:
M. Joiner
Eng./Appr.:
V. Kalra
Date:
Sept 1, 2006 Sheet 5 of 9
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
5.2.2 Top View (mm/inches)
0.51 ? .25 typ. 0.51 ? .25 typ.
(0.020 ? .010) (0.020 ? .010)
1.60 ? .20
(0.063 ? .008)
3.20 ? .20
(0.126 ? .008)
5.2.3 Side View (mm/inches)
0.51 ? .25 typ. 0.51 ? .25 typ.
(0.020 ? .010) (0.020 ? .010)
0.89 +.20, -.1510
(0.035 + .008, -.006)
3.20 ? .20
(0.126 ? .008)
6.0 Electrical Specifications
6.1 Table of Electrical Specifications
Catalog
Number Ampere
Rating Voltage
Rating Interrupting
Rating* Typical
Resistance**
(ohms)
Typical
I
2
T
CC12M10A 10A 24Vdc 150A 0.0045 2.0
CC12M12A 12A 24vdc 150A 0.0039 7.0
CC12M15A 15A 24Vdc 150A 0.0031 25.5
CC12M20A 20A 24Vdc 150A 0.0018 48.6
*Measured at designated voltage, rise time of less than 50 microseconds, battery source
**Measured at < 10% of rated current
0.51 .25 typ.
0.020
.010
0.89
+ .20
-.15
0.035
+.008
-
.
006
1.60 .20
0.063
.008
0.51 .25 typ.
0.020
.010
0.51 .25 typ.
0.020
.010
0.51 .25 typ.
0.020
.010
3.20 .20
0.126
.008
3.20 .20
0.126
.008
EPSrCClZM CClZM M. Joiner V Kalra Scpll.200() Shcci b of 9 % of Rated Current Operating Time Requirement 100% 4 hours minimum 350% 5 second maximum li'l' 10 0.1 T (S) 0. 01 0. 001 0. 0001 10 100 1(A) 1000
Document No.:
EPS-CC12M
Title:
CC12M
Created By:
M. Joiner
Eng./Appr.:
V. Kalra
Date:
Sept 1, 2006 Sheet 6 of 9
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
6.2 Operating Time Requirements
% of Rated Current Operating Time Requirement
100% 4 hours minimum
350% 5 second maximum
Due to the high current rating of the fuse, solder pads and trace and/or wire sizes and placement can
significantly affect operating times. Application testing is required.
6.3 Time Current Curve
DNUK EPSrCClZM CClZM M. Jomcr Sept 1. 2006 V Kalra Shem 7 of 9 CC12M10A 10 CC12M12A 12 CC12M15A 15 CC12M20A 20
Document No.:
EPS-CC12M
Title:
CC12M
Created By:
M. Joiner
Eng./Appr.:
V. Kalra
Date:
Sept 1, 2006 Sheet 7 of 9
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
7.0 Agency Approvals
UL Recognition for US and Canada – File E19180
8.0 Marking Specification
8.1 Ampere rating to be marked on ceramic (white) side of fuse. Glass (green) side to be
unmarked.
8.1.1 Table of device markings
Catalog Symbol Marking
CC12M10A 10
CC12M12A 12
CC12M15A 15
CC12M20A 20
9.0 Soldering Recommendation(s)
9.1 Wave Solder
9.1.1 Reservoir Temperature: 260°C (500°F)
9.1.2 Time in Reservoir: 10 second maximum
9.2 Infrared Reflow
9.2.1 Reservoir Temperature: 260°C (500°F)
9.2.2 Time in Reservoir: 30 second maximum
10.0 Packaging Specification(s)
10.1 3,000 fuses on 8mm tape and reeled on a 7 inch (178mm) reel per EIA Standard
RS481.
10.2 The fuses are oriented in embossed pockets with the ceramic (white) side facing up to
facilitate proper mounting. It is recommended that fuses are mounted with the ceramic
(white) side facing up.
EPSVLL 12M CClZM M. Jomcr Sept 1. 2006 V Kalra Shem Xof‘) H- H- Percentage of Rating h u Text and Pack F
Document No.:
EPS-CC12M
Title:
CC12M
Created By:
M. Joiner
Eng./Appr.:
V. Kalra
Date:
Sept 1, 2006 Sheet 8 of 9
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
11.0 Temperature De-Rating Curve
11.1 Normal Ambient Temperature: 23°C + 3°C (74°F+3.6°F)
11.2 Operating Temperature: -55°C to 125°C, with proper correction factor applied
11.2.1 Chart of Correction Factor
0
20
40
60
80
100
120
140
-55 -25 0 23 50 85 105 125
Temperature in Degrees C
Percentage of Rating
11.3 Storage Temperature: -55°C to 125°C
12 Process Flow Chart
Purchase
Element and
Pad Ink
Purchase
Dielectric
Paste
Purchase Cover
and Identification
Glass
Purchase
Substrate
Screen Print and
Fire
Purchase
Termination Ink
Dice
Purchase
Dicing Tape
Test and Pack
Fuses
Roll and Clean
Fuses
Plate Fuses
Apply Term
and Fire
EPSrCClZM CClZM M. Jomcr V Kalra Scpll.20l)() Shem 9 of 9
Document No.:
EPS-CC12M
Title:
CC12M
Created By:
M. Joiner
Eng./Appr.:
V. Kalra
Date:
Sept 1, 2006 Sheet 9 of 9
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design
applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of
any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a
product has been selected, it should be tested by the user in all possible applications.
13 Environmental (Reliability) Data (based on CHIP Fuse Qualification Program)
13.1 Thermal Shock - MIL-STD-202, Method 107, Test Condition B (-65°C to 125°C)
13.2 Vibration - MIL-STD-202, Method 204, Test Condition C (55 to 2000 Hz, 10G)
13.3 Moisture Resistance - MIL-STD-202, Method 106, 10 day cycle
13.4 Solderability - ANSI/J-STD-002, Test B
14 End