Datenblatt für MC-E LED Binning and Labeling von Cree LED

Datenblatt - Kommentare/Fehler melden

Binning & LaBeLing

EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. This document is provided for informational purposes only and is

not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please

contact Cree Sales at sales@cree.com.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

WWW.CREE.COM/XLAMP

CLD-AP20 REV 8C

Cree® XLamp® MC-E LED

INTRODUCTION

This document describes the product nomenclature required to

select and order Cree XLamp® MC-E LEDs. XLamp MC-E LEDs

are tested and sorted into bins which are then combined into

orderable kits identified by an order code.

All XLamp LEDs are tested and sorted by color and brightness

into a unique bin. Each bin contains LEDs from only one color

and brightness group and is uniquely identified by a bin code.

White XLamp LEDs are sorted by chromaticity (color) and

luminous flux (brightness). Color XLamp LEDs are sorted by

dominant wavelength (color) and luminous flux (brightness).

LEDs are shipped on reels containing LEDs from one bin and are

always labeled with the appropriate bin code.

Kits contain LEDs from a number of similar bins and are fully

defined by their order codes. A full explanation of the order

codes for XLamp MC-E LEDs, as well as a list of standard order

codes, is provided in this document.

MC-E White MC-E Color MC-E Dynamic White

TABLE OF CONTENTS

Bin and Order Code Format (White) ..............................................2

Bin and Order Code Format (EasyWhite®) ....................................3

Bin and Order Code Format (Dynamic White) ..............................4

Bin and Order Code Format (Color) ..............................................5

Performance Groups – Brightness ...............................................6

Performance Groups – Chromaticity ............................................7

Performance Groups – Dominant Wavelength ............................9

Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE

Curve ...............................................................................................9

Standard Order Codes and Bins

MC-E Cool White ...................................................................12

MC-E Neutral White ..............................................................13

MC-E Warm White ................................................................14

MC-E Dynamic White ............................................................14

MC-E EasyWhite® ..................................................................15

MC-E Color ............................................................................16

§S§GCC-BD-HHHH-NNNNNN Series WW SSSGCC BD-WWW—FF—G-AAAAA E

Copyright © 2008-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a

trademark of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

BIN AND ORDER CODE FORMAT (WHITE)

Bin codes and order codes are configured in the following manner:

SSSGCC-BD-HHHH-NNNNNN

Internal code

CRI

A = Standard CRI

Number of chips

4 = 4 chips

Series

MCE = MC-E

Color

WT = White

Optical characteristic

2 = Lambertian

Kit number

Order Code

Bin Code

SSSGCC-BD-WWW-FF-G-AAAAA

Internal code

Optical characteristic

Number of chips

4 = 4 chips

Series

MCE = MC-E

Color

WT = White

CRI

A = Standard CRI

Chromaticity group

Luminous flux group

SSSCCC-BD-HHHH-NNNNNNNNN '7 Senes SSSC_C£-B D-WWW—FF-GG-AAAA ﬂ

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

BIN AND ORDER CODE FORMAT (EASYWHITE®)

Bin codes and order codes are configured in the following manner:

SSSCCC-BD-HHHH-NNNNNNNNN

Kit number

Optical characteristic

Color

EZW = EasyWhite

Series

MCE = MC-E

CRI

A = Standard CRI

H = 80 CRI

P = 85 CRI

U = 90 CRI

Internal code

Order Code

SSSCCC-BD-WWW-FF-GG-AAAA

Series

MCE = MC-E

CRI

A = Standard CRI

H = 80 CRI

P = 85 CRI

U = 90 CRI

Chromaticity group

Internal code

Flux group

Optical characteristic

Color

EZW = EasyWhite

Bin Code

SSSgig-BD-HHHH-NNNNNNNNN ﬂ n FF-WWWWOODOO E

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

BIN AND ORDER CODE FORMAT (DYNAMIC WHITE)

Bin codes and order codes are configured in the following manner:

SSSCCC-BD-HHHH-NNNNNNNNN

Kit number

Optical characteristic

Color

DWT = Dynamic White

Series

MCE = MC-E

CRI

A = Standard CRI

Internal code

Order Code

SSSCCC-BD-FFFF-WWWW00000

Chromaticity group

Optical characteristic

Color

DWT = Dynamic White

Series

MCE = MC-E

CRI

A = Standard CRI

Flux group

Internal code

Bin Code

E SSSGCC-BD—ﬂﬂ-NN N NNNNN E E SSSGCC-BD-ﬂ-{ﬂ NM NM MMKK L z x Series Series

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

BIN AND ORDER CODE FORMAT (COLOR)

Bin codes and order codes are configured in the following manner:

SSSGCC-BD-HHHH-NNNNNNNNN

Series

MCE = MC-E

Color

CT = Red, green, blue, white

Optical characteristics

2 = Lambertian

Internal code

Dominant wavelength kit (RGB)

Chromaticity kit for white

Flux kit

Internal code

Package configuration

A = Individually addressable (all anodes on same side)

Number of chips

4 = 4 chips

Order Code

SSSGCC-BD-HHHH-NNNMMMKKK

Chromaticity bin for white die

Flux bin for each die (RGBW)

Package configuration

A = Individually addressable (all anodes on same side)

Number of chips

4 = 4 chips

Series

MCE = MC-E

Color

CT = Red, green, blue, white

Optical characteristics

2 = Lambertian

Dominant wavelength bin for each die (RGB)

Internal code

Bin Code

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

PERFORMANCE GROUPS – BRIGHTNESS

XLamp MC-E White and EasyWhite® LEDs are tested for luminous flux and placed into one of the following luminous-flux groups:

Group Code Minimum Luminous Flux

@ 350mA (lm)

Maximum Luminous Flux

@ 350mA (lm)

F210 240

G 240 280

H 280 320

J 320 370

K 370 430

M 430 490

• Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350mA.

• The flux and chromaticity are measured with all LEDs lit simultaneously.

Each die in the XLamp MC-E Dynamic White LED is tested individually for luminous flux and placed into one of the following luminous

flux groups. For the XLamp MC-E Dynamic White LED the flux groups specify only a minimum per-die flux and do not specify a maximum.

Color Group Code Minimum Luminous Flux

@ 350 mA

White

G 70

H 80

J 90

K100

Each LED die in the XLamp MC-E Color LED is tested individually for luminous flux and placed into one of the following luminous-flux

groups. The luminous-flux groups for the XLamp MC-E Color LED specify only minimum flux and do not have a maximum.

Color Group Code Minimum Luminous Flux

@ 350mA

Red K 30.6

Green P 67.2

Blue E 8.2

White J 80

K100

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

PERFORMANCE GROUPS – CHROMATICITY (IF=350mA PER EMITTER)

XLamp MC-E White LEDs and the white LED in the XLamp MC-E Color LED are tested for chromaticity and placed into one of the regions

defined by the bounding coordinates on the following pages. The XLamp MC-E White and EasyWhite LEDs are tested with each LED die

connected to independent drive circuits at 350mA and all LED die lit simultaneously. The white LED in the XLamp MC-E Color LED is

tested individually.

Region x y Region x y

.283 .284

.314 .355

.295 .297 .316 .332

.298 .288 .306 .322

.287 .276 .301 .342

.292 .306

.317 .319

.295 .297 .329 .330

.283 .284 .329 .318

.279 .291 .318 .308

.295 .297

.329 .345

.308 .311 .329 .330

.310 .300 .317 .319

.298 .288 .316 .332

.306 .322

.329 .369

.308 .311 .329 .345

.295 .297 .316 .332

.292 .306 .314 .355

.301 .342

.329 .330

.306 .322 .329 .345

.292 .306 .346 .359

.287 .321 .344 .342

.308 .311

.348 .384

.317 .319 .346 .359

.318 .308 .329 .345

.310 .300 .329 .369

.316 .332

.317 .319

.308 .311

.306 .322

Region x y Region x y Region x y Region x y

.3371 .3490

.3376 .3616

.3463 .3687

.3451 .3554

.3451 .3554 .3463 .3687 .3551 .3760 .3533 .3620

.3440 .3428 .3451 .3554 .3533 .3620 .3515 .3487

.3366 .3369 .3371 .3490 .3451 .3554 .3440 .3428

.3512 .3465

.3529 .3597

.3615 .3659

.3590 .3521

.3529 .3597 .3548 .3736 .3641 .3804 .3615 .3659

.3615 .3659 .3641 .3804 .3736 .3874 .3702 .3722

.3590 .3521 .3615 .3659 .3702 .3722 .3670 .3578

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

Region x y Region x y Region x y Region x y

.3670 .3578

.3702 .3722

.3825 .3798

.3783 .3646

.3702 .3722 .3736 .3874 .3869 .3958 .3825 .3798

.3825 .3798 .3869 .3958 .4006 .4044 .3950 .3875

.3783 .3646 .3825 .3798 .3950 .3875 .3898 .3716

.3889 .3690

.3941 .3848

.4080 .3916

.4017 .3751

.3941 .3848 .3996 .4015 .4146 .4089 .4080 .3916

.4080 .3916 .4146 .4089 .4299 .4165 .4221 .3984

.4017 .3751 .4080 .3916 .4221 .3984 .4147 .3814

.4147 .3814

.4221 .3984

.4342 .4028

.4259 .3853

.4221 .3984 .4299 .4165 .4430 .4212 .4342 .4028

.4342 .4028 .4430 .4212 .4562 .4260 .4465 .4071

.4259 .3853 .4342 .4028 .4465 .4071 .4373 .3893

.4373 .3893

.4465 .4071

.4582 .4099

.4483 .3919

.4465 .4071 .4562 .4260 .4687 .4289 .4582 .4099

.4582 .4099 .4687 .4289 .4813 .4319 .4700 .4126

.4483 .3919 .4582 .4099 .4700 .4126 .4593 .3944

40F

.3744 .3685

35F

.3981 .3800

30F

.4242 .3919

27F

.4475 .3994

.3782 .3837 .4040 .3966 .4322 .4096 .4573 .4178

.3912 .3917 .4186 .4037 .4449 .4141 .4695 .4207

.3863 .3758 .4116 .3865 .4359 .3960 .4589 .4021

40H

.3784 .3741

35H

.4030 .3857

30H

.4291 .3973

27H

.4528 .4046

.3804 .3818 .4061 .3941 .4333 .4062 .4578 .4138

.3867 .3857 .4132 .3976 .4395 .4084 .4638 .4152

.3844 .3778 .4099 .3890 .4351 .3994 .4586 .4021

XLamp MC-E DynamicWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding

coordinates.

Color Color Code CCx CCy

Cool White

0.3140 0.3550

0.2937 0.3312

0.3009 0.3042

0.3170 0.3190

0.329 0.369

0.329 0.33

0.3144 0.3166

0.3099 0.3509

Warm

White H

0.4562 0.4260

0.4813 0.4319

0.4646 0.4034

0.4418 0.3981

PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)

l \ K, ;/<>

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

PERFORMANCE GROUPS – DOMINANT WAVELENGTH

The red, green and blue LEDs in the XLamp MC-E Color LED are tested individually for dominant wavelength (DWL) and sorted into one

of the DWL bins defined below.

Color DWL Group Minimum DWL

@ 350mA

Maximum DWL

@ 350mA

Blue

K 450 455

L 455 460

M 460 465

Green

2 520 525

3 525 530

4 530 535

Red A 620 630

CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE

Cool White

BBL

5000 K

5700 K

6350 K

7000 K

8300 K

10000 K

0.30

0.29

0.28

0.27

0.26

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

CCy

CCx

0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.35 0.36

0.34

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED

Neutral and

Warm White

Dynamic

White

2600 K

2700 K

2900 K

3000 K

3200 K

3500 K

3700 K

4000 K

4300 K

4500 K

4750 K

5000 K

5300 K

8B 8C

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.46

0.47

0.48

0.49

CCy

CCx

ANSI

C78.377A

2700 K

3000 K

3500 K

4000 K

4500 K

5000 K

5700 K

6500 K

8000 K

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.46

0.28

0.29

0.30

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.46

0.47

0.48

0.49

CCy

CCx

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE - CONTINUED

EasyWhite 2700 K

3000 K

3500 K

4000 K

4500 K

40F

35F

30F

27F

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.46

0.47

0.48

0.49

CCy

CCx

ANSI C78.377 Quadrangle

EasyWhite "F" (4-Step) Chromaticity Regions

2700 K

3000 K

3500 K

4000 K

4500 K

40H

35H

30H

27H

0.35

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.36

0.37

0.38

0.39

0.40

0.41

0.42

0.43

0.44

0.45

0.46

0.47

0.48

0.49

CCx

ANSI C78.377 Quadrangle

EasyWhite "H" (2-Step) Chromaticity Regions

CCy

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

STANDARD ORDER CODES AND BINS (MC-E COOL WHITE)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity

regions and luminous flux range.

XLamp MC-E LED Standard Order Codes - White

Minimum Luminous Flux (lm)

@ 350mA* Chromaticity Regions Kit Number

Group Flux (lm)

Cool White (5000 K – 10,000 K)

K 370

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 000K01

WC, WD, WF, WG 000K02

WC, WD, WF, WG, WH, WJ, WN, WP 000K03

M 430

WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP 000M01

WC, WD, WF, WG 000M02

WC, WD, WF, WG, WH, WJ, WN, WP 000M03

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp MC-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

STANDARD ORDER CODES AND BINS (MC-E NEUTRAL WHITE)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity

regions and luminous flux range.

XLamp MC-E LED Standard Order Codes - White

Minimum Luminous Flux (lm)

@ 350mA* Chromaticity Regions Kit Number CCT

Group Flux (lm)

Neutral White (3700 K - 5000 K)

H 280 5C, 5D, 6A, 6B 000HF6 3700 K

J 320

3A, 3B, 3C, 3D 000JE3 5000 K

3C, 3D, 4A, 4B 000JF4 4750 K

4A, 4B, 4C, 4D 000JE4 4500 K

4C, 4D, 5A, 5B 000JF5 4300 K

5A, 5B, 5C, 5D 000JE5 4000 K

5C, 5D, 6A, 6B 000JF6 3700 K

K 370

3A, 3B, 3C, 3D 000KE3 5000 K

3C, 3D, 4A, 4B 000KF4 4750 K

4A, 4B, 4C, 4D 000KE4 4500 K

4C, 4D, 5A, 5B 000KF5 4300 K

5A, 5B, 5C, 5D 000KE5 4000 K

5C, 5D, 6A, 6B 000KF6 3700 K

M 430

3A, 3B, 3C, 3D 000ME3 5000 K

3C, 3D, 4A, 4B 000MF4 4750 K

4A, 4B, 4C, 4D 000ME4 4500 K

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp MC-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order codewithout advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

STANDARD ORDER CODES AND BINS (MC-E WARM WHITE)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity

regions and luminous flux range.

XLamp MC-E LED Standard Order Codes - White

Minimum Luminous Flux (lm)

@ 350 mA* Chromaticity Regions Kit Number CCT

Group Flux (lm)

Warm White (2600 K - 3700 K)

G 240 7C, 7D, 8A, 8B 000GF8 2900 K

8A, 8B, 8C, 8D 000GE8 2700 K

H 280

6A, 6B, 6C, 6D 000HE6 3500 K

6C, 6D, 7A, 7B 000HF7 3200 K

7A, 7B, 7C, 7D 000HE7 3000 K

7C, 7D, 8A, 8B 000HF8 2900 K

8A, 8B, 8C, 8D 000HE8 2700 K

J 320

6A, 6B, 6C, 6D 000JE6 3500 K

6C, 6D, 7A, 7B 000JF7 3200 K

7A, 7B, 7C, 7D 000JE7 3000 K

7C, 7D, 8A, 8B 000JF8 2900 K

8A, 8B, 8C, 8D 000JE8 2700 K

K 370 6A, 6B, 6C, 6D 000KE6 3500 K

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp MC-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels influx bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

STANDARD ORDER CODES AND BINS (MC-E DYNAMIC WHITE)

The following table provides the two order codes for XLamp MC-E Dynamic White LEDs.

Part Color CCT / Dominant Wavelength Range

Minimum Luminous Flux (lm)

@ 350mA Order Code

Group Flux (lm)

Dynamic White

2 cool-white die 6500 K K 100

MCEDWT-A1-0000-0000A1001

2 warm-white die 2700 K G 70

2 cool-white die 6000 K K 100

MCEDWT-A1-0000-0000A1002

2 warm-white die 2700 K G 70

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

STANDARD ORDER CODES AND BINS (MC-E EASYWHITE®)

The following table provides order codes for XLamp MC-E EasyWhite LEDs.

Color CCT

Range

Minimum Luminous Flux

@ 350mA, 25° C 2-Step 4-Step

Group Flux (lm) Chromaticity

Region Order Code Chromaticity

Region Order Code

Standard CRI

EasyWhite

4000 K

K 370

40H

MCEEZW-A1-0000-0000K040H

40F

MCEEZW-A1-0000-0000K040F

J 320 MCEEZW-A1-0000-0000J040H MCEEZW-A1-0000-0000J040F

3500 K

K 370

35H

MCEEZW-A1-0000-0000K035H

35F

MCEEZW-A1-0000-0000K035F

J 320 MCEEZW-A1-0000-0000J035H MCEEZW-A1-0000-0000J035F

H 280 MCEEZW-A1-0000-0000H035H MCEEZW-A1-0000-0000H035F

3000 K

J 320

30H

MCEEZW-A1-0000-0000J030H

30F

MCEEZW-A1-0000-0000J030F

H 280 MCEEZW-A1-0000-0000H030H MCEEZW-A1-0000-0000H030F

2700 K

J 320

27H

MCEEZW-A1-0000-0000J027H

27F

MCEEZW-A1-0000-0000J027F

H 280 MCEEZW-A1-0000-0000H027H MCEEZW-A1-0000-0000H027F

G 240 MCEEZW-A1-0000-0000G027H MCEEZW-A1-0000-0000G027F

80-CRI

Minimum

EasyWhite

4000 K

J 320

40H

MCEEZW-H1-0000-0000J040H

40F

MCEEZW-H1-0000-0000J040F

H 280 MCEEZW-H1-0000-0000H040H MCEEZW-H1-0000-0000H040F

3500 K

J 320

35H

MCEEZW-H1-0000-0000J035H

35F

MCEEZW-H1-0000-0000J035F

H 280 MCEEZW-H1-0000-0000H035H MCEEZW-H1-0000-0000H035F

3000 K

J 320

30H

MCEEZW-H1-0000-0000J030H

30F

MCEEZW-H1-0000-0000J030F

H 280 MCEEZW-H1-0000-0000H030H MCEEZW-H1-0000-0000H030F

2700 K

J 320

27H

MCEEZW-H1-0000-0000J027H

27F

MCEEZW-H1-0000-0000J027F

H 280 MCEEZW-H1-0000-0000H027H MCEEZW-H1-0000-0000H027F

G 240 MCEEZW-H1-0000-0000G027H MCEEZW-H1-0000-0000G027F

85-3CRI

Minimum

EasyWhite

3000 K

H 280

30H

MCEEZW-P1-0000-0000H030H

30F

MCEEZW-P1-0000-0000H030F

G 240 MCEEZW-P1-0000-0000G030H MCEEZW-P1-0000-0000G030F

2700 K

H 280

27H

MCEEZW-P1-0000-0000H027H

27F

MCEEZW-P1-0000-0000H027F

G 240 MCEEZW-P1-0000-0000G027H MCEEZW-P1-0000-0000G027F

0.45 a,“ o .3 a 42 0.41 m 0.19 O 38 017 go 35 0,15 n.1o 0.13 m 0 31 am 0 19 m 0.27 o 21 u 25 0.29 a an a 31m 32 0.13 0.34 u 35 u as (1.37 n as u 39 0.400 A: a a2 a n3 0.44 u 45 u neon D.“ D as: ccx

For warranty information, please contact Cree Sales at sales@cree.com.

XLamp® mC-E LED Binning & LaBELing

STANDARD ORDER CODES AND BINS (MC-E COLOR)

The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s color or

chromaticity bins and luminous flux range.

XLamp MC-E LED Standard Order Codes - Color

Color

Minimum Luminous Flux (lm)

@ 350mA* DWL / Chromaticity Bins Kit Number

Group Flux (lm)

Red K 30.6 A

00A5AAAA1

Green P 67.2 2, 3, 4

Blue E 8.2 K, L, M

White K 100 WC, WD, WF, WG

Red K 30.6 A

00A4AAAB1

Green P 67.2 2, 3, 4

Blue E 8.2 K, L, M

White J 80 5A, 5B, 5C, 5D

For other flux and chromaticity combinations, contact Cree or an authorized distributor.

* Cree XLamp MC-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher

than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin

restrictions specified by the order code.

Datenblatt für MC-E LED Binning and Labeling von Cree LED

INFORMATION

HILFE

KONTAKT

FOLGEN SIE UNS