Datenblatt für nRF6707 Brief von Nordic Semiconductor ASA

NORDIC SEMKuNDU{TDR Power Profiler Kit Current measurement too/ for embedded deve/opment Power Profiling made easy The Power Profiter Kit is an easyetoeuse toot for current measurements and power consumption opttmizatton of embedded soluttons The Power Proftter Ktt ptugs directty onto the nRFSW DK and nRFSZ UK through the Ardutno Uno Revtston 3 standard ptn headers and the spectal power measurement header on these ktts Thts altows easy power opttmization wtth a mtmmum of effort There‘s atso an addmonal connector for connecting to and measurtng current on externat boards enabltng you to measure current consumptton on your flnat hardware It supports VCC tevets KEY FE - 077C - Down - 77 kH - Butttr Wtih ' 5m Wtih - Mcas - Mcas - Mcas upto - DCSA Pytho - Expo APPLIC - Powe - Esitm KIT CO - Powe . Softw
Power Profiler Kit Product Brief v1.0
KEY FEATURES
• 0-70 mA current measurement range
• Down to 0.2 µA measurement resolution
• 77 kHz sampling rate
• Built-in programmable regulator
with a 1.8 V to 3.6 V output range
• Support for external power supply
with a 1.8 V to 3.6 V input range
• Measure current on nRF51 DK or nRF52 DK
• Measure current on custom boards
• Measure average current consumption
up to 20 seconds
• Desktop application is available in
Python allowing customization
• Export measurement data for post-processing
APPLICATIONS
• Power debugging of embedded applications
• Estimate battery lifetime of completed solution
KIT CONTENT
• Power Profiler Kit board
• Software and firmware files
NEEDED RESOURCES
• nRF51 DK or nRF52 DK
KEY FEATURES
•
0-70 mA current measurement range
•
Down to 0.2 µA measurement resolution
•
77 kHz sampling rate
•
Built-in programmable regulator
with a 1.8 V to 3.6 V output range
•
Support for external power supply
with a 1.8 V to 3.6 V input range
•
Measure current on nRF51 DK or nRF52 DK
•
Measure current on custom boards
•
Measure average current consumption
up to 20 seconds
•
Desktop application is available in
Python allowing customization
•
Export measurement data for post-processing
•
Power debugging of embedded applications
•
Estimate battery lifetime of completed solution
KIT CONTENT
•
Power Profiler Kit board
•
Software and firmware files
Power Profi ler Kit
Current measurement tool for embedded development
Power Profiling made easy
The Power Profiler Kit is an easy-to-use tool for current measurements and power consumption
optimization of embedded solutions. The Power Profiler Kit plugs directly onto the nRF51 DK and
nRF52 DK through the Arduino Uno Revision 3 standard pin headers and the special power measurement
header on these kits. This allows easy power optimization with a minimum of effort. There’s also an
additional connector for connecting to and measuring current on external boards, enabling you to
measure current consumption on your final hardware. It supports VCC levels between 1.8 V and 3.3 V
and has an onboard regulator that will supply up to 70 mA to external applications.
AW, ARROW ELECTRONICS AVNE 1'” Express <9> DISTRELEC 7 MOUSER numonm / ELECTRONICS Sarnicunducmismmcu YRONDNEIM, NORWAY MM ‘m m —m M Wm mm— \m
Power Profiler Kit Product Brief v1.0
ORDER INFORMATION
nRF6707
Power Profiler Kit, current measure-
ment tool for embedded development
The Power Profiler Kit is available from the following online partners:
Primary Logo Secondary Stacked Logo
Headquarters:
Trondheim, Norway
Tel: +47 72 89 89 00
For more information
Visit www.nordicsemi.com for the complete
product specification about this and any other
wireless ultra-low power products.
About Nordic Semiconductor
Nordic Semiconductor is a fabless semiconductor
company specializing in ultra-low power short-
range wireless communication. Nordic is a public
company listed on the Norwegian stock exchange.
WORLD WIDE
OFFICE LOCATIONS
High accuracy and resolution analog measurement
The Power Profiler Kit has an advanced analog measurement
unit with a high dynamic input range. This allows accurate
current consumption measurements for the entire range
typically seen in embedded applications based on nRF devices,
all the way from single µA to tens of mA. For the lowest input
range the resolution is 0.2 µA. The time resolution is also
high enough to detect spikes.This is achieved by having a
77 kHz sampling rate of the current.
Improve debugging of code
The Power Profiler Kit supports both external trigger input
and a trigger output. This makes it possible to combine the
use of the Power Profiler Kit with oscilloscopes and logic
analyzers. Code-synchronized measurements can be achieved
by connecting the external trigger input to an I/O pin on the
device being tested. This I/O pin must be configured to output
a synchronization pulse.
Being able to synchronize current measurement with
code makes it easier to spot software problems quickly.
Easy to use desktop application
The desktop application supporting the Power Profiler Kit
provides several ways of assessing the power consumption,
both instantaneous and averaged over a set time period. The
kit can be configured to take readings over a period of up to
20 seconds, while simultaneously zooming in on a millisecond
interval of interest. It is possible to measure instantaneous
current for two separate points and at the same time measure
the average current between the points. The points can be set
separately for both windows at the same time. Measured data
can also be exported for post processing.