Datenblatt für G53270004 Specification von Diodes Incorporated

(DPERICDM‘ asaRonix-ecera“ 1o, APPROVED PREPARED 0A 3 7 (I o W aura W, APPROVED BY CUSTOMER : AVL Status PSE Technolo Cor oration *** A company of m PER/COM Semiconductor Corporation ***
CUSTOMER
NOMINAL FREQUENCY
PRODUCT TYPE
SPEC. NO. ( P/N )
CUSTOMER P/N
ISSUE DATE
PSE Technology Corporation
SPECIFICATION FOR APPROVAL
32.768 KHz
TYPE G5 SMD CRYSTAL
G53270004
0
Mar.10
,
2014
VERSION
PSE Technolo
gy
Cor
p
oration
*RoHS Exception
*HF-Halogen Free
*REACH Compliant
APPROVED QAPREPARED
G
,
Please return one copy with approval to PSE-TW
APPROVED BY CUSTOMER：AVL Status
No.2, Tzu-Chiang 5th Rd, Chung Li Industrial Park,
Chung Li City, Taoyuan County, Taiwan (R.O.C.)
TEL: 886-3-451-8888
FAX: 886-3-461-3865
http://www.saronix-ecera.com.tw
E0-R-4-014 Rev. E Page i
(DPERICDM'flsaRonix-ecera'
Updated Dimensions drawingMar.10,2014
Updated Dimensions drawing
F Jun.7,2011 Updated Dimensions drawing
E
New Logo & Changed Marking
C Jul.1,2010
D Sep.21,2010
Initial Release
Change Marking
Change ESR from 60KΩ to 65KΩ
B May.5,2010
A Sep.28,2009
VERSION HISTORY
Version
No.
Version
Date
Customer Receipt
Date
Supplier Receipt
Date NotesDescription
TYPE G5 SMD CRYSTAL
Jan.19,2011
G53270004
VER. G 10-Mar-14
G
E0-R-4-014 Rev. E Page ii
Aging 1 3 ppm Max 151 year (DPBeIcaM'asaRonlxecera-
ELECTRICAL SPECIFICATIONS
SRe Part Number : G53270004
-55~85Storage Temperature Range
TR -40~85 °C
Temperature Coefficient K -0.035 ppm/°C
Aging
±3
ppm
°C
Operating Temperature Range
Drive Level DL 1 μWMax.
Equivalent Series Resistance ESR 65 KΩ
Typ.
Max.
Typ.
Max 1st year
at 25°C ± 5°C
Frequency Tolerance FT ± 20 ppm
Load Capacitance CL 12.5 pF
Parameters Symbol Specifications Units Notes
Nominal Frequency Fn
G53270004
VER. G 10-Mar-14
TYPE G5 SMD CRYSTAL
32.768 KHz
Reliability ( Mechanical and Environmental Endurance )
No.
1
(1) Vibration Frequency: 10 to 55Hz
(2) Vibration Amplitude: 1.5mm
(3) Cycle Time: 1-2min(10-55-10Hz)
(4) Direction: X.Y.Z
(5) Duration: 2h/each direction
2
3 Times free drop from 75cm height to hard wooden
board of thickness more than 30mm
3
Put crystal units into a hermetic container and
Helium for 0.5-0.6Mpa, and keep it for 1h;
Check the leakage by a Helium leak detector
Leakage: 1x10¯8Pa·m3/s Max.
Shock
Leakage
Vibration
Frequency Change: ±10ppm Max.
Frequency Change: ±10ppm Max.
Test Items Test Method and Condition
Insulation Resistance 500 MΩ
Resistance Change: ±15% or 5kΩ Max.
Aging
±
3
ppm
Requirements
Max
1st
year
Min.
Resistance Change: ±15% or 5kΩ Max.
E0-R-4-014 Rev. E Page 1
o“ 4260°CDeak *250:10‘c\‘\\ +220 “0 \ 4170210 “0 Temnevdule —> 7%‘7 ”0:20 590‘ Time —> sec. (BF’ERICDM'flsaRonix-ecera-
4
Frequency Change: ±10ppm Max.
Frequency Change: ±10ppm Max.
Resistance Change: ±25% or 10kΩ Max.
Note: the temperature used herein means the
temperature on the circuit board.
Reflow: 2 times max.
Reflow soldering
G53270004
TYPE G5 SMD CRYSTAL
VER. G 10-Mar-14
5 Lead Strength
The crystal lead with the 0.9kg(9N) power (keep it for The crystal lead is not abnormity
(DIP)
30s±5s) and bend the crystal lead 90° with 0.45kg
power and two times
6 High Temperature
The crystal units shall be put in somewhere for 2 hrs Frequency Change: ±10ppm Max.
Endurance
at temperature of -85℃±2℃, then keep it for 1 to 2 hrs Resistance Change:±15% or 5kΩ Max.
under room temperature.
7 Low Temperature
The crystal units shall be put in somewhere for 2 hrs
Endurance
at temperature of -25℃, then keep it for 1 to 2 hrs
under room temperature.
8 Humidity
The crystal units shall be put in somewhere at 40℃
Endurance
in relative humidity of 90-95% for 48 hrs, then keep
it for one or two hours under room temperature.
9 Temperature
Temperature shift from low(-40℃) to high(100℃, keep
Cycle
30 mins), satisfy high(100℃) to low(-40℃, keep
30 mins), then go up to room temperature for 5 cycles.
10 Salt Spray Test
Put the crystal units in the salt spray room (salt The appearance shall has no abnormity
density: 5%) at the temperature of 35℃ for 96 hrs. and soldering is good.
Then clean it with water and dry its surface. Frequency Change: ±10ppm Max.
Resistance Change:±15% or 5kΩ Max.
E0-R-4-014 Rev. E Page 2
T32 3 3' 0.110.05 2 #4 *3 3. V V N c a +4 0 0 +4 3. [1 1 1' D g “10.151005 6702 #2 g ' * ' 0.11005 to. 7010.2 o 1% 31:1 4015 N. J a "’. a n t 1 0.210053 0.151005 Mi” 3. 8 0.55102 0.45102 3 d I“' m. Lfi D m. 0.31005 #1I'“I| 0.251005 C’ 0.31:0.05 #4 ,6 D.25i0.05 .LL_ 2 0.21005 0.21005 3 m o #4 #3 1.2 5.1 ‘ - > I 1 "z ‘ D #1 #2 1.2 (DHBQ/caM'asanonlxecera—
Marking
Dimensions
(Units: mm)
TYPE G5 SMD CRYSTAL
T32
G53270004
VER. G 10-Mar-14
Internal Lead Connection Recommended Soldering Pattent(unit: mm)
Note:
1. Do not connect #2 and #3 to external device and GND.
2. The part of the cylinder inside resin mold may be sometimes exposed, however, it does not affect
the characteristics of crystal unit.
3. Please make sure that there is no pattern under TMXLF-130 on the circuit board.
E0-R-4-014 Rev. E Page 3
PU P1 p2 % <7 hvik="" t="" $="" q="" “1%="" ®="" $="" (d="" $="" )5="" (d="" w="" l="" h="" h="" h="" w="" w="" u="" h="" u="" m="" m="" “i="" a="" k1="" 1="" 1="" a,="" k0="" ‘__v="" m="" w="" e="" f="" d0="" d1="" p0="" p1="" p2="" 16.nuinjn="" 1.75:u.1="" 7.5din.1="" 1.522‘="" 1.u::l="" annim="" a.nu:u.1="" z.nfliu.u6="" a0="" b0="" bl="" k0="" k1="" t="" 10*pd="" 1.70iu.1="" 7.2uiu.1="" $010.1="" l.7iu.1="" l.25iu.l="" u.35iu.u5="" qu.uuiu.2u="" ‘="" i="" la="" ‘4;="" ‘="" _="" mm="" s="" l="" r,="" 7wl="" ,="" (dper/cam="" fisanonixecem="">
TAPE AND REEL SPECIFICATION
1. Tape and Reel form conform to EIA-481-B.
2. The quantity of crystal units per reel shall be 3000PCS.
3. A "LABEL" on which necessary information is clearly written is on the surface of packing box and the reel.
CARRIER TAPE DIMENSIONS
TYPE G5 SMD CRYSTAL
G53270004
VER. G 10-Mar-14
REEL DIMENSIONS
E0-R-4-014 Rev. E Page 4