Datenblatt für Wireless M-Bus Quick Start Guide von Silicon Labs

69° SILIEDN LABS Download and Install Wireless M-Eus Demo Kit So'twore From Silicon Labs Website www.silab5.comIwirelessmbus SILIEflll [HS Wireless M eter Eus Installer Download and Install USBXpress Development Kit From Silicon Labs Website http:llwww.silabs.comIUSEXpress .....s..~w..« 9.... km? | aunmm mm.» m r we Check "Launch USEXpress Driver Installer“ Install the USBXpress Driver before connecting the USB cable Configure shorting Blocks for USB Power F..- Short pins 2 8x 3 on J10 Remove shorting block onJ11 Connect one end of the USB Cable to the board at J2 n mm: um mum-- Connect the other end of the USE Cable to the PC Run Mbus Dem o Executable Dehult Location: C:\SiLabs\MCU \Wireless_Meter_Bus \Sofl’ware \MbusDemo.exe Adjust Settings Press "Run" to update Meter Configntion "m" N‘ Obs erve Power Measure!» int on Demo Board left display ”Wm.“ M .
Silicon Laboratories Inc. Copyright © 2010 by Silicon Laboratories Rev. 0.1 2/10
400 West Cesar Chavez
Austin, TX 78701
Email: MCUinfo@silabs.com
Internet: www.silabs.com
WIRELESS METER-BUS DEMONSTRATION KIT QUICK-START GUIDE
Step by Step Instructions:
Additional Information
For additional information, use the following support resources:
Wireless M-Bus web page at:
www.silabs.com/wirelessmbus
Wireless M-Bus Demo Users Guide
Download Wireless M-Bus Stack
“AN451: Wireless Meter Bus Software Implementation”
“AN452: Wireless Meter Bus Programmers’ Guide”
Latest versions of application notes can be found at:
https://www.silabs.com/products/mcu/Pages/ApplicationNotes.aspx
MCU Knowledgebase
(available at www.silabs.com SUPPORT)
Contact an Applications Engineer using the online information request
form (available at www.silabs.com SUPPORT Contact Technical
Support).