Datenblatt für EDZV15B von Rohm Semiconductor

Dat DUDE! DEE Dggmmgm @Q * www mhm.com
1/1
Part No. Explanation
Diodes
www.rohm.com
○
c 2013 ROHM Co., Ltd. All rights reserved. 2013.04 - Rev.D
Da
t
asheet
1 S S 3 5 5 T E --- 1 7
Taping CodePart No.
Small signal / rectifier diode
U D Z T E --- 1 7S
Taping CodePart No.
Sub division
5.1B
Zener voltage
Zener diode
When ordering, specify the part number.
Check each code against the tables shown below.
Fill in from the left, leaving any extra boxes empty on the right.
Example:
Example:
Packaging type
Package Code Package style Direction
Basic ordering
unit (pcs)
T2R Embossed tape Cathode on sprocket hole side 8,000
Cathode on sprocket hole side
Non-direction
VML2 T2R Embossed tape Cathode on sprocket hole side 8,000
VMN2 T2RA Embossed tape Cathode on sprocket hole side 8,000
VMD2 T2R Embossed tape Cathode on sprocket hole side 8,000
KMD2 T2R Embossed tape Cathode on sprocket hole side 8,000
VMD3 T2L Embossed tape One terminal on sprocket hole side 8,000
TE61 Embossed tape Cathode on sprocket hole side 3,000
T2R Embossed tape Cathode on sprocket hole side 8,000
Cathode on sprocket hole side
Non-direction
EMD3 TL Embossed tape One terminal on sprocket hole side 3,000
EMD3F TL Embossed tape One terminal on sprocket hole side 3,000
EMD4
EMD5
EMD6
TE-17
TW11*
1
UMD3 T106 Embossed tape One terminal on sprocket hole side 3,000
UMD3F TL Embossed tape One terminal on sprocket hole side 3,000
UMD4 TL Embossed tape Cathode on sprocket hole side (DA227) 3,000
UMD5 TR Embossed tape Three terminals on sprocket hole side 3,000
UMD6 TR Embossed tape Cathode on sprocket hole side 3,000
TN Non-direction
ڎTR*
2
Cathode on sprocket hole side
SSD3 T116 Embossed tape One terminal on sprocket hole side 3,000
SMD3 T146 Embossed tape One terminal on sprocket hole side 3,000
SMD5 T148 Embossed tape Three terminals on sprocket hole side 3,000
T108*
3
Anode on sprocket hole side
T110 Non-direction
MPD6 TR Embossed tape Terminal No.1 on sprocket hole side 1,000
TSMD5 TR Embossed tape Terminal No.1 on sprocket hole side 3,000
TSMD6 TR Embossed tape Terminal No.1 on sprocket hole side 3,000
TSMD8 TR Embossed tape Terminal No.1 on sprocket hole side 3,000
TUMD2 TR Embossed tape Cathode on sprocket hole side 3,000
TUMD2S TR Embossed tape Cathode on sprocket hole side 3,000
TUMD5 TR Embossed tape Terminal No.1 on sprocket hole side 3,000
PMDU TR Embossed tape Cathode on sprocket hole side 3,000
PMDS TE25 Embossed tape Cathode on sprocket hole side 1,500
CPD TL Embossed tape Fin on sprocket hole side 2,500
LPDS TL Embossed tape Fin on sprocket hole side 1,000
TO-220FN(3pin)
֣ Bulk box 500
TO-220FN(2pin)
֣
Stick box
1,000
TO-220NFM
֣ Stick box 1,000
HMD8 TE61 Embossed tape Cathode on sprocket hole side 3,000
HMD12 TE61 Embossed tape Cathode on sprocket hole side 3,000
TSMD8 TR Embossed tape Terminal No.1 on sprocket hole side 3,000
T2R Embossed tape Cathode on sprocket hole side 8,000
Embossed tape Cathode on sprocket hole side 3,000
Notes: *1 Regarding the UMD2 package, only 1SS356 is available in TW11.
*2 Regarding the UMD6 package, only RB731XN is offered in TR.
*3 Regarding the SMD6 package, only IMN10 and RB731U are available in T108.
ޓ Available outside Japan
Embossed tape
Embossed tape
Embossed tape
Embossed tape
UMD6
SMD6
EMD2
UMD2
GMD2
3,000
3,000
8,000
8,000
T2N
T2N
ROHm SEMICONDUCTOR
R1102
A
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
The information contained herein is subject to change without notice.
Before you use our Products, please contact our sales representative
and verify the latest specifica-
tions :
Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
The Products specified in this document are not designed to be radiation tolerant.
For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)