PI3302-20-EVAL1: 5V @ 10A, 8 ~ 36V in

The PI33XX-XX-EVAL1 evaluation board demonstrates the features and benefits of the Picor® ZVS Buck Regulator PI33XX family, The board features the ZVS Buck Regulator SIP (U1), along with inductor (L1), ceramic input (C1-C8) and output capacitors (C10-C16).

The evaluation board provides several options for making input power (VIN and GND) and output load (VOUT and GND) connections. The user can solder tab style banana jacks or wire, use threaded binding posts secured by a retaining nut, or to simply use a #6 nut and bolt connection.

All the I/O pins are labeled and routed to the board edge for easy access. Each I/O pin is accompanied by an adjacent 50 mil through-hole for adding a test point or to facilitate wiring to external circuitry.

For PI33XX-20 regulators only, there is a location for a 4-pin I2C header that allows users to set certain device parameters and to read the fault registers of the regulator. Each regulator can be assigned an address from 0 to 7 using the two tri-state address pins (ADR0 and ADR1)