Texas Instruments' DAC7750 and DAC8750 are low-cost, precision, fully-integrated 12- and 16-bit digital-to-analog converters (DACs) designed to meet the requirements of industrial process-control applications. These devices can be programmed as a current output with a range of 4 to 20 mA, 0 to 20 mA, or 0 to 24 mA. The DAC7750 and DAC8750 include reliability features such as CRC error checking on the serial peripheral interface (SPI™) frame, a watchdog timer, an open circuit, compliance voltage, and thermal alarm. In addition, the output current can be monitored by accessing an internal precision resistor.
These devices include a power-on-reset function to ensure that the device powers-up in a known state (IOUT is disabled and in a Hi-Z state). The CLR terminal sets the current output to the low end of the range if the output is enabled. Program the zero and gain registers to digitally calibrate the device in the end system. The output slew rate is also programmable by register. These devices can superimpose an external HART® signal on the current output, and can operate with a +10 to +36 V supply.
| Features |
|
- Current output options:
- 0 mA to 24 mA
- 4 mA to 20 mA
- 0 mA to 20 mA
±0.1% FSR typical Total Unadjusted Error (TUE)
DNL: ±1 LSB max
Max loop compliance voltage: AVDD – 2 V
|
- Internal 5 V reference (10 ppm/°C, max)
- Internal 4.6 V power supply output
- CRC frame error check
- Watchdog timer
- Thermal alarm
- Open-circuit alarm
- Terminals to monitor output current
|
Settings
Fast Delivery
Free Shipping
Incoterms
Payment Types
Marketplace Product
Texas Instruments' DAC7750 and DAC8750 are low-cost, precision, fully-integrated 12- and 16-bit digital-to-analog converters (DACs) designed to meet the requirements of industrial process-control applications. These devices can be programmed as a current output with a range of 4 to 20 mA, 0 to 20 mA, or 0 to 24 mA. The DAC7750 and DAC8750 include reliability features such as CRC error checking on the serial peripheral interface (SPI™) frame, a watchdog timer, an open circuit, compliance voltage, and thermal alarm. In addition, the output current can be monitored by accessing an internal precision resistor.
Austria