MC56F837xx Digital Signal Controller

Product Highlights > MC56F837xx Digital Signal Controller

            MC56F837xx Digital Signal Controller
                    NXP's digital signal controllers' 5 V-tolerant I/O provides design flexibility and system cost reduction
    

Image of NXP's MC56F837xx Digital Signal Controller NXP's MC56F83xxx series of performance-level digital signal controllers are based on the 32-bit 56800EX DSP core, with both core and bus frequency up to 100 MHz. It can support both USB and CAN FD, dual-partition Flash, ECC Flash, and boot ROM. The MC56F83xxx series is offered in both industrial-grade and automotive-grade products.

The MC56F83xxx series offers enhanced DMA function (eDMA), an inter-module crossbar (XBAR) with a more flexible event generator (EVTG), a low-power high-speed ADC, extended RAM size, and a high-resolution PWM with up to sixteen channels. These features make it ideal for high-performance digital power conversion, advanced motor control, and automotive charging applications.

Features

DSC based on 32-bit 56800EX core
- Up to 100 MIPS at 100 MHz core frequency in fast mode
- DSP and MCU functionality in a unified, C-efficient architecture
On-chip memory
- Up to 256 KB Flash memory
- Up to 64 KB data/program RAM
- On-chip Flash memory and RAM can be mapped into both program and data memory spaces
Analog
- Two high-speed, eight-channel, 12-bit ADCs with a dynamic x1, x2, and x4 programmable amplifiers
- Four analog comparators with integrated 8-bit DAC references
- Up to two 12-bit digital-to-analog converters (DACs)
Communication interfaces
- Up to three high-speed queued SCI (QSCI) modules with LIN slave functionality
- Up to two queued SPI (QSPI) modules
- Two I²C/SMBus ports
- One FlexCAN module with flexible data-rate (CAN-FD) supported
- One USB 2.0 controller
Timers
- Two 16-bit quad timers (2 x 4 16-bit timers)
- Two periodic interval timers (PITs)
- Two eFlex PWM modules with up to 2 x 8 PWM outputs, including 2 x 8 channels with high-resolution NanoEdge placement

Security and integrity
- Cyclic redundancy check (CRC) generator
- Windowed computer operating properly (COP) watchdog
- External watchdog monitor (EWM)
Clocks
- On-chip relaxation oscillators: 200 kHz, and 48 MHz IRC
- Crystal/resonator oscillators
System
- Integrated power on-reset (POR), low-voltage interrupt (LVI), and brown-out reset module
- Inter-module crossbar and event generator
- JTAG/enhanced on-chip emulation (EOnCE) for unobtrusive, real-time debugging
Operating characteristics
- Single supply: 2.7 V to 3.6 V
- 5 V-tolerant I/O (except for RESETB pin which is a 3.3 V pin only)
- Operation ambient temperature (industrial):
  - -40°C to +105°C (in production)
  - -40°C to +125°C (Q3 2020)
- Operation ambient temperature (automotive):
  - -40°C to +105°C (in production)
  - -40°C to +125°C (Q1 2021)

Applications

Power conversion
- Switch-mode power supplies and power management
- Power distribution systems
- Circuit breakers
- Instrumentation
- UPS
- Solar inverters
- Solar inverter optimizers
- Wireless charging
Automotive
- EV compressors
- EV chargers
- Power modules
- On-board chargers
- Wireless charging for auto

Motor control
- Home appliances
- Motor control (ACIMs, BLDCs, PMSMs, SRs, and steppers)
- Industrial motors
- Industrial controls

MC56F837xx Digital Signal Controllers

	Image	Manufacturer Part Number	Description	Available Quantity	Price	View Details
		MC56F83789AVLLA	IC MCU 32BIT 256KB FLASH 100LQFP	92 - Immediate	$16.45	View Details
		MC56F83783AVLHA	IC MCU 32BIT 256KB FLASH 64LQFP	160 - Immediate	$14.21	View Details