ADSP-BF561-EZLITE Datasheet by Analog Devices Inc.

ANALOG DEVICES I 3
Key Features
•ADSP-BF561 Blackfin Processor
•64 MB (16 M x 16-bit x 2) SDRAM
•8 MB (4 M x 16-bit) FLASH memory
•AD1836 multichannel 96 kHz audio codec
• 2 x 2 RCA jacks for two channels of
stereo audio input
• 3 x 2 RCA jacks for three channels of
stereo audio output
•ADV7183A advanced 10-bit video decoder
• 3 RCA jacks for composite (CVBS),
differential component (YUV) or S video
(Y/C) input
•ADV7179 chip scale NTSC/PAL
video encoder
• 3 RCA jacks for composite (CVBS),
component (RGB), differential component
(YUV) or S video (Y/C) output
•RS-232 UART line driver/receiver
•USB-based debugger interface
•JTAG ICE 14-pin header
•Evaluation suite of VisualDSP++
development tools
•Flash utility for downloading boot code to
on-board Flash memory
•16 general-purpose LEDs, 4 general-
purpose push-buttons
•3 expansion connectors for evaluating
and interfacing with the processor’s
peripheral interfaces
•CE-certified
System Requirements
•Pentium®166 MHz or higher
•Minimum of 32 megabytes of RAM
•Windows®98, Windows 2000, or
Windows XP
•One available USB connector
Overview
The ADSP-BF561 EZ-KIT Lite™provides developers with a cost-effective method for initial
evaluation of the ADSP-BF561 Blackfin®Processor for audio and video applications via
a USB-based PC-hosted tool set. Evaluation of analog audio applications is achieved
through the use of the AD1836 multichannel 96 kHz audio codec. By utilizing the
ADV7183A advanced 10-bit video decoder and ADV7179 chip scale NTSC/PAL video
encode, the user is able to evaluate video applications such as simultaneous input and
output video processing enabled by the dual core architecture of the ADSP-BF561
Processor. With this EZ-KIT Lite, users can learn more about Analog Devices’ ADSP-BF561
hardware and software development and quickly prototype applications.
The EZ-KIT Lite includes an ADSP-BF561 Processor desktop evaluation board along
with an evaluation suite of the VisualDSP++™development and debugging environment
with the C/C++ compiler, assembler, and linker. It also includes sample processor
application programs, CE-approved power supply, and a USB cable.
www.analog.com/processors/tools
EZ-KIT Lite for Analog Devices
ADSP-BF561 Blackfin Processor
CROSSCGRE' DEVICES
The VisualDSP++ development and debugging environ-
ment, along with the USB-based debugger interface
that operates up to 12 Mbits/second, enables users to
perform standard debugging functions (such as read
and write memory, read and write registers, load and
execute executables, set and clear breakpoints, and
single-step assembly, C, and C++ source code). The
evaluation versions of the included software tools are
limited to use with the EZ-KIT Lite. For faster and
unrestricted debugging, a family of JTAG emulators
and full versions of VisualDSP++ are available
separately from Analog Devices.
An Analog Devices Blackfin EZ-Extender™daughter
board (sold separately) can attach to the ADSP-BF561
EZ-KIT Lite using the three expansion connectors,
allowing a number of Analog Devices High Speed
Converter (HSC) evaluation boards and the OV6630
OmniVision camera evaluation board to interface with
the EZ-KIT Lite.
CROSSCORE Development Tools
The ADSP-BF561 EZ-KIT Lite is part of the Analog
Devices CROSSCORE™Tools product line, which is
composed of a comprehensive set of development
tools providing engineers with easier and more robust
methods for developing and optimizing systems.
The CROSSCORE components include:
• VisualDSP++ development and debugging
environment
• EZ-KIT Lite evaluation kits
• EZ-Extender daughter boards
• Emulators
The easy-to-use VisualDSP++ integrated development
environment speeds development, debugging, and
deployment while shrinking product development
cycles and improving time to market. The EZ-KIT Lite
evaluation kits provide an easy way to investigate the
performance of Analog Devices’ family of embedded
processors and DSPs. EZ-Extender daughter boards
give developers access and ability to connect various
peripherals from Analog Devices and third parties to
the expansion interface of the EZ-KIT Lite evaluation
kits. Emulators are available for both PCI and USB
host platforms for rapid on-chip debugging. Analog
Devices is committed to continuous expansion of
leading-edge development solutions for design
engineers everywhere.
Embedded Processors and DSPs
Analog Devices is a leading supplier of embedded and
digital signal processing solutions, from the low power
ADSP-21xx DSP families to the high performance
Blackfin and TigerSHARC®Processors, and from the
low cost SHARC®DSPs to integrated mixed-signal
DSPs that are ideal for an ever-increasing spectrum
of applications. Analog Devices’ advances in design
provide faster processing, more memory, lower power
consumption, and simplified system integration. Analog
Devices products and technology provide a competitive
edge, complete with expert technical support, compre-
hensive development tools, and the DSP Collaborative,
an independent network of third-party developers. For
more information about Analog Devices processors and
DSPs, visit www.analog.com/processors.
CROSSCORE Tools Support
Tel: 1-800-ANALOGD
Email: dsptools@analog.com
Web: www.analog.com/processors/tools
Ordering Information
Please call Analog Devices CROSSCORE Tools at
603-883-2430 or your local ADI sales representative
or distributor for pricing and ordering information
for part number: ADDS-BF561-EZLITE.
www.analog.com/processors/tools
Embedded Processing Support
www.analog.com/processors
Email (in the U.S.A.): embedded.support@analog.com
Email (in Europe): embedded.europe@analog.com
Fax (in the U.S.A.): 781.461.3010
Fax (in Europe): 49.89.76903.557
Worldwide Headquarters
Analog Devices, Inc.
One Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
Toll-free: 800.262.5643 (U.S.A. only)
Analog Devices, Inc. Europe
c/o Analog Devices SA
17-19, rue Georges Besse
Parc de Haute
Technologie d’Antony
F-92182
Antony Cedex, France
Tel: 33.1.46.74.45.00
Fax: 33.1.46.74.45.01
Japan Headquarters
Analog Devices, Inc.
New Pier Takeshiba
South Tower Building
1-16-1 Kaigan,
Minato-ku, Tokyo
105-6891, Japan
Tel: 813.5402.8210
Fax: 813.5402.1063
Southeast Asian Headquarters
Analog Devices, Inc.
4501 Nat West Tower
Times Square
One Matheson Street
Causeway Bay
Hong Kong, PRC
Tel: 852.2.506.9336
Fax: 852.2.506.4755
© 2003 Analog Devices, Inc. All rights reserved.
Trademarks and registered trademarks are the property
of their respective companies. Printed in the U.S.A. PH04612-2-11/03(0)