ReferenceDesignLibrary

Designs (210)

210 Results - Page 3/21 |< < 1 2 3 4 5 > >|

EPC9001: 15A @ 0 ~ 40V, Half Bridge

Manufacturer: EPC

The EPC9001 development board is a 40 V maximum device voltage, 15 A maximum output current, half bridge with onboard gate drives

View Design

DC1676A: 20A OR'ing or Dual Diode, 4.5 ~ 60V in

Manufacturer: Linear Technology/Analog Devices

Demonstration Circuit 1676A showcases the LTC®4359 ideal diode controller with reverse input protection. The board includes two independent LTC4359 ideal diode circuits, sharing a common ground and operating over a 4.5V to 60V range. Each circuit comprises a load switch and ideal diode connected in series. Power to the load may be turned on and off by using the SHDN input, and the load is protect…

View Design

EPC9062: 48A, 0 ~ 100V, Half H-Bridge

Manufacturer: EPC

These development boards are in a half-bridge topology with onboard gate drives, featuring the EPC2030/31/32 eGaN® field effect transistors (FETs).

View Design

EPC9114(#2): 10W, Class 2, Rezence (A4WP) Compatible

Manufacturer: EPC

The EPC9114 wireless power demonstration system is a high efficiency, A4WP compatible, Zero Voltage Switching (ZVS), Voltage Mode class-D wireless power transfer demonstration kit capable of delivering up to 10 W into a DC load while operating at 6.78 MHz (Lowest ISM band). The purpose of this demonstration system is to simplify the evaluation process of wireless power technology using eGaN® FETs…

View Design

EPC9005C: 7A, 0 ~ 40V, Half H-Bridge Driver

Manufacturer: EPC

The EPC9005C development board is a 40 V maximum device voltage, 7 A maximum output current, half bridge with onboard gate drives

View Design

EPC9052: 1A, 0 ~ 40V, 15 MHz, Class E Amplifier

Manufacturer: EPC

The EPC9052 is a high efficiency, differential mode Class-E amplifier development board that can operate up to 15MHz.

View Design

DC2118A: Single Cell Li-Ion or LiFePO4 Charger

Manufacturer: Linear Technology/Analog Devices

Demonstration circuit 2118A is a combination step-down battery charger and step-up battery backup regulator using the LTC®4040 monolithic system power manager.

View Design

EPC9048: 12A, 0 ~ 160V, Half H-Bridge

Manufacturer: EPC

The EPC9048 development boards are in a half bridge topology with onboard gate drives, featuring the EPC2034 eGaN field effect transistors (FETs).

View Design

STK554U392AGEVB: 15A, 0 ~ 450V, 3-Ph Half Bridges

Manufacturer: ON Semiconductor

Evaluation board for the "Inverter Power H-IC" highly integrated device containing all High Voltage (HV) control from HV-DC to 3-phase outputs in a single small SIP module.

View Design

EPC9203: 20A, 0 ~ 60V, Half H-Bridge Driver

Manufacturer: EPC

This development board, measuring 11mm x 12mm, contains two enhancement mode (eGaN®) field effect transistors (FETs) arranged in a half bridge configuration with an onboard Texas Instruments LM5113 gate drive.

View Design
210 Results - Page 3/21 |< < 1 2 3 4 5 > >|